Connecting and Operating
Typical Application
1) Connect the HDMI input sources into HDMI splitter(Input cables are optional).
2) Connect two CAT-5E/6 cables to both the STP/UTP outputs of HDMI splitter and inputs of STP/UTP receiver .
Please pay attention to the sequence of the two cables,Cat O/1->receiver 1, CatO/2->receiver 2. (The cable termination
must follow the standard of EIA/TIA 568B, ).
3) Connect the HDMI output (such as HD-LCD/HD-DLP) into the STP/UTP receiver.
4) Connect the IR RX receiving cable into STP/UTP receiver IR RX and connect The IR TX cable into HDMI splitter IR emitter.
5) Insert the DC side of 12v power supply into HDMI splitter and the unit is ready to use .
6) Turn on the power.
Attention: Insert/Extract cables gently.
Operating Instructions
4
Operating Instructions
5
DIP Switch EDID setting index
Position1
Position2
Position3
Function
0
0
0
1080P stereo (Using Embedded EDID) (note 1)
0
0
1
1080P 5.1 (Using Embedded EDID) (note 2)
0
1
0
Edid auto mix, mix result is compatible with all HDMI sinks (note 3)
0
1
1
copy the first detected HDMI output's edid to the input port (note 4)
1
0
0
LC mode, 1080P stereo (Using Embedded EDID) (note 5)
1
0
1
LC mode, Edid auto mix, mix result is compatible with all HDMI sinks (note 6)
1
1
0
LC mode, copy the first detected HDMI output's EDID to the input port (note 7)
1
1
1
Fix single UTP output (note 8)
Note1: The splitter will use the embedded 1080P-stereo EDID when the DIP switch is in this mode. The EDID will be 1080P video
and stereo audio
Note2: The splitter will use the embedded 1080P-5.1 EDID when the DIP switch is in this mode. The EDID will be 1080P video
and 5.1 audio
Note3: The splitter will mix the EDID data of all HDMI sinks. And forward this mixed EDID to the HDMI source device. The thought
of EDID mixing is to enable all the connected sink device can have video and audio they can output. For example, One
TV is 1080P, stereo, another is 1080i, 5.1 audio. The mixed EDID will be 1080i, stereo audio
Note4: Copy the EDID data to the input port. It will copy the EDID data from the first detected output port
Note5: Please refer to Note1. The only difference is that if video appears noise or interference when the long HDMI/UTP cable
is used or the quality of HDMI/UTP cable is not so good, use this mode.
Note6: Please refer to Note 3. The only difference is that if video appears noise or interference when the long HDMI/UTP cable
is used or the quality of HDMI/UTP cable is not so good, use this mode
Note7: Please refer to Note 4.The only difference is that if video appears noise or interference when the long HDMI/UTP cable
is used or the quality of HDMI/UTP cable is not so good, use this mode
Note8: Fix single UTP output, use the embedded 1080P-stereo EDID
Play 00:21
Blue-Ray Player
Input
Output
IR-TX
IR-RX
Cat5e/6
Output
IR-RX
Cat5e/6
Output
IR-RX
Cat5e/6
Output
Output
IR-RX
Cat5e/6
Output
IR-RX
Cat5e/6
Output
IR-RX
Cat5e/6
Output
IR-RX
IR-RX
Cat5e/6
MP-SP18