11
Digital USB Input
You can connect your computer to the Desktop Headphone Amplifier using a USB cable
with a Type-A connector on one end and a Type-B on the other end (available separately).
This allows you to use your computer and any playback software you prefer to output
audio through the amp. The digital signal will be converted by the internal DAC and sent to
the analog headphone and pre-amplifier outputs.
OPERATION
Power
Momentarily press the Menu Button on the front panel to turn the amplifier on.
While the unit is powering on, the Monolith™ logo will display. When it is fully ready
for use, the Home Screen will display.
Press and hold the Menu Button until the display scrolls off to turn the amplifier off.
Source Selection
Perform the following steps to select the input source.
1.
Press and hold the Enter Button for several seconds.
2.
Use the Value Knob to scroll backwards or forwards through the input options. The
Display will show the currently selected input.
