First of all, make sure one of the machine bolt diameters (part i, j, k or l) fits the mounting holes on your television. Once you have
selected the correct size bolt, please use one of the four diagrams below respective to the bolt you will be using. You will thread each
bolt to the TV using the appropriate lock washer (part m, n, o or p), washer (part s or t) and spacer (part q or r). Please make sure the
Monitor Brackets (part b & c) are vertically centered and level with each other. Install the adjustment knob (part y) and tilt adjustment
bolt (part z) to the outside center of each of the monitor brackets.
Step 2
Mounting the Wall Plate to the Wall
Brick, Solid Concrete and Concrete Block Mounting:
Use the Wall Plate (part a) as a template to mark 6 hole locations on the wall. Three in the top row of slots and three more in the
bottom row. Make sure these holes are level and there is at least 6” distance between any two holes. Pre-Drill these holes with a ½”
masonry bit to at least 2.5” in depth. Insert a Concrete Anchor (part x) into each of these holes. Make sure the anchor is seated
completely flush with the concrete surface even if there is a layer of drywall or the other material in front. Attach the Wall Plate to the
wall using 6 Lag Bolts (part v) and 6 Lag Bolt Washers (part w), as shown in Diagram 2A.
Wood Stud mounting:
The Wall Plate (part a) must be mounted to two wood studs at least 16” apart. Use a stud finder to locate two adjacent studs. It is a
good idea to verify where the studs are located with an awl or thin nail as shown in Diagram 2B. Pre-drill a 2.5” deep hole at the
desired height in each stud using a 3/16” drill bit. Make sure these holes are in the center of the studs and level with each other. Use
the Wall Plate as a template to mark the location of the second hole in each stud. Drill pilot holes at each of the marked locations.
Attach the Wall Plate to the wall using the 4 Lag Bolts (part v) and 4 Lag Bolt Washers (part w).
Step 3
Attaching Monitor to Wall Plate and Adding the Safety Bolts
