6 of 8
Attach threaded end of adjuster tube (
AA
) to threaded
fitting in ceiling plate
Attach threaded end of adjuster tube (
DD
M
DD
) to threaded
fitting in ( ) and lock nut ( ).
. Tighten securely aligning
slot in end of adjuster tube (
AA
) with one of the holes
in the side of threaded fitting. Insert and tighten one
M4 x 3 mm hexagon fillister screw (
M
) to lock adjuster
tube (
AA
) to threaded fitting.
Installer must verify that the ceiling will safely support
the combined weight of all attached equipment and
hardware.
WARNING
Adjuster tube must be fully threaded (six or seven
full turns) onto threaded fitting in ceiling plate and then
locked with screw (
C
).
WARNING
Installation of Extension Column
AA
M
CC
DD
M
N
BB
N
Slide extension pipe (
CC
) over adjuster tube (
BB
)
to the desired height. Attach with two M8 x 60 mm
hexagon fillister head screws (
N
) and lock nut (
N
).
Slide extension pipe (
BB
) over adjuster tube (
AA
)
to the desired height. Attach with two M8 x 60 mm
hexagon fillister head screws (
K
) and lock nut (
K
).