6
Remote Control
Power: Press the Power button to turn the converter on or to
put it in standby mode.
Source: Press the Source button to display the Source Menu.
USB: Press the USB button display the contents of a connected
USB drive.
Picture: Press the Picture button to cycle through the Soft,
Standard, Bright, and Personal picture modes.
Ratio: Press the Ratio button to adjust the display ratio, from
-5% to +5%.
Navigation: Press the arrow buttons to navigate the menus.
OK: Press the OK button to select a menu item or to confirm a change.
Menu: Press the Menu button to display the Main Menu or to exit the current menu.
Exit: Press the Exit button to close the menu system or to exit USB playback mode.
Vol-: Press the Vol- button to decrease the output volume level.
Vol+: Press the Vol+ button to increase the output volume level.
Output: Press the Output button to cycle through the four output resolutions
(1024x768@60Hz, 720p@60Hz, 1080p@60Hz, and 4K@30Hz).
INPUT FORMATS
The converter accepts the following input formats.
CVBS: NTSC, PAL, and SECAM with stereo audio
YPbPr: 1080p@50/60Hz, 1080i@50/60Hz, 720p@50/60Hz, 576i/p, 480i/p with stereo
audio
VGA: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 2380x2024@60Hz,
1280x720@60Hz, 1360x768@60Hz, 1440x900@60Hz, 1680x1050@60Hz,
1920x1080@60Hz with stereo audio
