9
INSTALLATION
Perform the following steps to connect the USB Audio
Recording Interface with your computer. To download the
latest drivers, firmware, manuals, etc., go to
www.monoprice.com and type the P/N into the search bar.
If available, support files are linked at the bottom of the
product page.
1.
Place the device on a flat surface near your
computer.
2.
Rotate the MIC GAIN1, GAIN2, and MONITOR knobs
fully counterclockwise to the minimum position.
3.
Place the +48V switch in the off position (out).
4.
Ensure that your computer is powered on.
5.
Plug one end of the included USB cable into the
USB port on the device, then plug the other end
into an available USB port on your computer. Your
computer will automatically install the necessary
USB drivers and the LED on the front panel will
illuminate. No external drivers are required.
