6
PRODUCT OVERVIEW
1.
Transport/MMC Buttons: Six MIDI Machine Control (MMC) buttons for controlling a
sequencer. The buttons can be reassigned to transmit Control Change messages.
The default functions, from top left to bottom right, are Loop, Rewind, Fast
Forward, Record, Stop, and Play.
2.
BANK Button: Press the BANK button to cycle through the four banks of settings.
One of the LEDs to the right of the button illuminates to indicate the selected bank
of settings.
3.
BANK LEDs: Four LEDs, one of which illuminates to indicate the selected bank of
settings.
4.
Assignable Buttons: These two buttons can be configured to send Control Change
messages.
5.
Slider: This slider is a General Controller that cannot be reassigned. When connected
to a hardware module, it serves as the Master Volume Controller. When connected
to a DAW, it controls the volume of the SRP12 only.
6.
Pads: Twelve velocity sensitive trigger pads that can be configured to send Note or
Control Change messages.
