3
INSTALLATION
NOTE: Follow the instructions carefully and use common sense when mounting the motor
and mirror ball.
WARNING: A falling mirror ball can cause serious injury!
The installation must be done in such a way that it can support 10 times the weight
of the mirror ball for at least 1 hour without showing any distortion.
The motor needs to be installed perfectly horizontally. Check the position with a
level. The motor and mirror ball must be installed out of the reach of persons.
Use all three screw openings to secure the housing to the mounting surface.
Use a chain of sufficient strength for the installation of the mirror ball below the
motor. The included chain will support the load limit of the motor.
Secure the cord of the AC adapter so that it is out of the path of the turning motor,
chain, and mirror ball.
SPECIFICATIONS
Power Supply
12VAC, 500mA, 6W AC adapter
DC Connector Characteristics
5.5mm barrel, 2.1mm pin, center positive
Power Consumption
4 watts
Max. Load
6.6 lbs. (3.0 kg)
Max. Diameter of Mirror Ball
11.8" (30cm)
Rotation Speed
1.5 rpm
Diameter of Motor Base Plate
4.33" (110mm)
Motor Height
2.2" (58mm)
Motor Weight
0.66 lbs. (0.3 kg)
Mirror Ball Weight
2.5 lbs. (1.14 kg)