8
9.
CH2 NL4 OUTPUT: 2-pin NL4 unbalanced speaker output connector.
10.
CH2 TS OUTPUT: 2-pin 1/4" TS unbalanced speaker output connector.
11.
LIMIT: Use this button to turn the built-in limiter on or off.
12.
EXHAUST VENT: The amplifier draws in cooling air through the vent on the front
panel and exhausts it through the vents on the rear and side panels.
STEREO OPERATION
The amplifier can be operated as a standard, 2-channel stereo amplifier. To enable stereo
operation, the MODE button (6) on the rear panel must be set to the STEREO position (out).
When in stereo mode, each channel operates independently, with its own dedicated input
connectors, sensitivity level controls, signal indicator LEDs, automatic limiter, fault
protection circuitry, power amp, and speaker outputs. Stereo mode supports speaker loads
down to 2 ohms.
Following is a sample connection diagram for basic stereo operation.
