1.8K
10K or greater
1K
120
Impedances
Microphone inputs
All other inputs
Tape out
All other outputs
DSP
Section
A/D and D/A converters
Type
s
of effects
24
-
bit
Echo,
Echo+Verb, Tremolo, Plate, Chorus,
Vocal
,
Rotary, Small Room, Verb, Large Hall
Max. MAIN MIX output
+22dBu XLR balanced (+16dBu un-balanced)
AUX range
Fader range
OFF to +15dB
OFF to +10dB
PHONES/CONTROL-ROOM range
OFF to +15dB
<-75dB @ 20Hz~22KHz A-weighted
Crosstalk
mono ch
stereo ch
<-85dB @0dB 20Hz~22KHz A-weighted
<-89dB @0dB 20Hz~22KHz A-weighted
Power
section
Power continuous
1KHz, THD 1%,
A-WTD
Power EIAJ 1KHz,
THD 1% stereo
500W X 2 @ 4 both channel (at 1KHz RMS power,THD<1%)
300W X 2 @ 8 both channel (at 1KHz RMS power,THD<1%)
Power Amplifier Section
650W X 2 @ 4 (ref.)
mode
Thermal
protection
Short protection
350W X 2 @ 8 (ref.)
O
ver-temperature power
limiting
T
hermal shutdown
S
hort-circuit protection
O
verload output protection
C
lip limiter
Protection
Limiter
P
ermanent signal limiter
H
igh frequency protection
T
emperature controlled 12V DC fa
n
output
Over voltage protection
DC offset shutdown
Power
supply
Main voltage
Fuse
110-120V ~50/60Hz
T12AL 250V
Introduction
Thank you for purchasing this 1000-watt 12-Channel Powered Mixer from Monoprice!
This professional mixer is ideal for live music and DJ performances, recording,
and as part of a mobile or fixed PA system. The powerful, built-in amplifier means
that you don't have to lug a separate power amplifier from gig to gig.
Although this device is extremely easy to operate, you should thoroughly read
the manual to get a complete understanding of this unit's capabilities. Please
keep this manual as a ready reference.
Ultra-low noise discrete MIC Preamps with +48V Phantom Power
4 MIC input channels with XLR and and balanced Line Inputs with Insert I/O
and dedicated compression control
Low Cut for each MIC Input
2 Stereo Input Channels
with mono XLR Inputs and TRS Jacks, plus 2 Stereo
Input Channels with RCA Jacks and TRS Jacks
3-band EQ and Peak LEDs
on each MIC channels, 2-band EQ and
Peak LEDs on Stereo
channels
1 AUX Send POST/PRE per channel for monitoring or external effects, 1 DFX (AUX)
Send POST Fader for internal effects or monitoring
Mute and PFL function for each channel, 60mm Fader for level control.
GR1/2 and Main L/R bus assign for each channel
2-Track Input assignable to Main Mix or Control Room / Headphone Outputs
Balanced XLR & TRS outputs for Main Mix
Built in 24-bit DSP effect with 100 presets
Built in high-powered
CLASS-D amplifier rated for:
2 x 500W@ 4
or 2 x 300W@ 8 (at 1KHz RMS peak power,THD<1%)
2 x 650W@ 4
or 2 x 350W@ 8 (ref. EIAJ)
Features
4
13
Hum & Noise
Controls
FOOT-SW
2-track, Phones Output, and Aux Sends
100 position preset selector (10 presets with 10 variations each)
Mute switch & Foot-switching with LED indicator
TIP:FX
SLEEV:GND
