5
CHARGING
Perform the following steps to charge the speaker.
1.
Plug one end of the included Micro USB Charging Cable into the USB Power Port
on the speaker, then plug the other end into a USB power source, such as a
computer, wall charger, or power bank (available separately). The
Volume/Charging LEDs illuminate blue while charging is in progress.
2.
When all four Volume/Charging LEDs are fully illuminated, the battery is fully
charge. Unplug the Micro USB Charging Cable from the USB power source, then
unplug it from the speaker. Store the cable in a safe place for future use.
USING THE SPEAKER AS A POWER BANK
This speaker features a large capacity 5000mAh rechargeable battery and a USB Type-A
output port, allowing you to use the speaker as a power bank to charge another device.
To charge another device, plug one end of its charging cable into the device, then plug
the other end into the USB Power Port on the speaker.
BLUETOOTH PAIRING
1.
When the speaker is first powered on, it will attempt to reconnect to a
previously paired device. If that device is powered off or out of range, the
speaker will automatically enter Bluetooth® pairing mode. The Bluetooth LED will
blink white, indicating that it is in Bluetooth pairing mode.
If the speaker is connected to a device and you want to connect a different
device, press and hold the Bluetooth Button for 2 seconds to disconnect the first
device and put the speaker in Bluetooth® pairing mode. The Bluetooth LED will
blink white, indicating that it is in Bluetooth pairing mode.
2.
With the speaker in Bluetooth pairing mode, open the Bluetooth settings on your
device and scan for nearby Bluetooth devices.
3.
Locate and select the MP43248 entry. If prompted for a passcode, enter 0000
(four zeros). Once connected, the Bluetooth LED will illuminate solid white.
