5
BATTERY CHARGING
The speaker will emit a beep every couple of seconds when the battery charge level is low. When it
does, perform the following steps to charge the battery.
1.
If the speaker is powered on, press and hold the Power Button for 2 seconds to turn the
speaker off.
2.
Plug one end of the included Micro USB Charging Cable into the Micro USB Charging Port on
the speaker, then plug the other end into a wall charger, power bank, computer, or other USB
power source (not included).
3.
The Volume-/Previous Track Button, Pause/Phone Button, and /Next Track Button
will sequentially indicate the current charge level. When all three buttons are fully illuminated,
the battery is fully charged. Note that a full charge can take up to 4 hours.
BLUETOOTH PAIRING
1.
When the speaker is first powered on, it will attempt to reconnect to a previously paired
device. If that device is powered off or out of range, the speaker will automatically enter
Bluetooth® pairing mode.
If the speaker is connected to a device and you want to connect a different device, press and
hold the Bluetooth Button for 2 seconds to disconnect the first device and put the speaker in
Bluetooth pairing mode.
