Monoprice 36373 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 13

Monoprice 36373 Скачать руководство пользователя страница 7

7

Rear Panel

1.

Power Cord: Plug the power cord into a nearby AC power outlet. This amplifier
accepts 110 ~ 240 VAC, 50/60 Hz, 4A.

2.

FM ANT: Connector for attaching the included FM antenna.

3.

DC IN: Alternative power input for use with a 24 VDC, 4A power source.

4.

AMPLIFIER OUT: Terminals for connecting passive or constant voltage speaker
systems.

5.

AUX OUT: Line level output RCA jacks.

6.

AUX1 IN: Line level input RCA jacks.

7.

AUX2 IN: Line level input RCA jacks.

8.

AUX2/MIC2: Switch to select either the AUX2 line level input or the MIC2 input.
When the switch is in the MIC2 position, the XLR jack is configured for use with a
dynamic microphone. When set to the PHANTOM position, the XLR jack is
configured to p48V phantom power for use with a condenser
microphone.

9.

+48V: The LED indicator illuminates when the AUX2/MIC2 switch is set to the
PHANTOM position for use with a condenser microphone.

10.

MIC2: XLR jack for connecting a balanced dynamic or condenser microphone.

11.

VOL: Gain control for the AUX2/MIC2 input.

12.

100V: Terminals for accepting a 100V emergency signal input.

«
...
5
6
7
8
9
...
»

Содержание 36373














Отзывы:

Нет отзывов