11
Finish Screen
1.
ONE MORE: Select this option to print the model again.
2.
GO HOME: Select this option to return to the Main Menu.
PREPARING THE PRINTER
Before you run your first test print, there are a few steps that you should take to begin
printing.
1.
Check the printer for issues:
Verify that the Z axis can move freely and that there is no debris or packaging
material on the Z axis lead screw. Use the Z Axis option on the Control Menu to
raise the build plate to near the top of the printer.
Verify that the FEP liner in the Resin Vat is clean and clear of any packaging
material or cured resin.
Verify that the LCD Display and UV Lamp are functional by selecting the Clear
option on the Control Menu, while observing the bottom of the empty Resin
Vat.
If any issues arise while checking the printer, please contact Technical Support
for assistance.
2.
Add resin to the Resin Vat.
a.
Move the print bed up to near the top of the Z axis.
b.
Twist to remove the magnetic Printing Platform.
