7
CHARGING
The speaker has a built-in rechargeable battery. To charge the battery, plug one end of
the included micro USB charging cable into the micro USB charging port, then plug the
other end into a USB power source, such as a wall charger. The LED next to the charging
port illuminates red while charging is in progress and is off when charging is complete.
A full charge takes approximately 3-4 hours, if the battery is fully depleted. The battery
should be fully charged before first use and at least once every three months.
BLUETOOTH PAIRING
Perform the following steps to pair the speaker with a mobile device.
1.
With the speaker powered off, press and hold the
button to turn it on. The
speaker will emit audio cues. If it is not already paired with a device, the
Connection Status LED will begin flashing blue. If it is solid blue and you want to
pair with a different device, press and hold the
button to cancel the
existing Bluetooth® pairing.
2.
Open the Bluetooth settings on your device, then scan for nearby Bluetooth
devices.
3.
Locate and select the MP33828 entry. The Connection Status LED will stop
flashing, will illuminate solid blue, and the speaker will emit audio cues.
AUDIO PLAYBACK
Use the following buttons to control audio playback.
Momentarily press the
button to decrease the volume level for Bluetooth®,
AUX, and microSD™ card playback.
Press and hold the
button to skip back to the previous track (Bluetooth
and microSD card playback modes only).
