6
LED STATUS
Operation
LED Status
Power On
LED flashes blue 2 times
Power Off
LED flashes red 2 times
Pairing
LED flashes red and blue alternately
Standby
LED flashes blue 3 times in 5 seconds
Incoming Call
LED flashes blue continuously
Low Battery
LED flashes red 2 times every 2 seconds
Charging
LED illuminates red while charging and changes to blue when charging
is complete.
PAIRING
Perform the following steps to pair the headphones with a smartphone or tablet. Note that
the headphones can be simultaneously paired with 2 devices.
1.
Ensure that the headphones are powered off.
2.
Press and hold the Multifunction Button (1) for 5 seconds. The LED Indicator (2) will
flash red and blue alternately, indicating that the headphones are in pairing mode.
3.
Search for available Bluetooth® devices on your device and select the MP27722
entry. If prompted for a passcode, enter 0000 (four zeroes). The LED Indicator (2)
will cease flashing.
PHYSICAL CONNECTION
If you do not wish to use the Bluetooth® streaming or if you want to listen to a device that
is not Bluetooth-enabled, plug one end of the included 3.5mm audio cable into the 3.5mm
Audio Jack (7) on the headphones, then plug the other end into the headphone output on
your audio source device.
