Monoprice 21711, Руководство пользователя

Страница: 10 / 21

10
19. Using the included plastic scraper, clean the extruded filament from the nozzle and
build platform.
20. Using the control wheel, select the Print option
from the main menu. The printer will read the
contents of the microSD
™
card and display
them on screen. Highlight the cat.gcode file,
then press the control wheel to start printing
the model.
21. After the first layer has been laid down, use
the control wheel to Pause or Cancel the
printing operation. Examine the layer and
compare the printed material with the images
in the table below. If the result is wrong, turn
off the printer and re-adjust the platform
height as indicated. Clean off the printed material using the included plastic scraper,
then print the model print again. Keep repeating this process until the result is
correct.
Wrong
The nozzle is too far from the
platform. This can result in the
extruded material not sticking to the
build platform.
Correct
The nozzle is at the correct height
above the platform.