8
5
CONTROLS
and
CONNECTION
Front Panel
1.
POWER
:
Toggles power on/off. When power is on, the LED above the power button is
illuminated.
2.
TREBLE
:
Adjusts the high frequency response from -10dB to +10dB.
3.
BASS
:
Adjusts the low frequency response from -10dB to +10dB.
4.
VU METER
:
Displays the audio signal level on a scale of -20dB to +3dB
5.
CD/BT
:
Selects which of the two inputs will be used.
6.
VOLUME
:
Adjusts the output volume level.
Rear Panel
7.
BT ANT
:
SMA connector for attaching the included Bluetooth
®
Antenna.
8.
CD
:
Line level left and right RCA jacks for input from a CD player (or other audio source).
9.
PRE OUT
:
Line level left and right RCA jacks for output to a powered sub woofer or other
power amplifier. PRE OUT is effected by the front panel Volume control.
10.
R
:
Two 5-way binding posts for connecting the positive and negative leads to the right
channel speaker.
11.
L
:
Two 5-way binding posts for connecting the positive and negative leads to the left channel
speaker.
12.
AC IN
:
Combination power input socket and fuse holder. Plug the included AC power cord
into the IEC 60320 C14 panel connector.
1
2
3
7
9
12
10
11
Speaker Connections
5.
Measure the distance between the amplifier and the speakers, taking into account the need
to route the wire around furniture or other obstacles. Cut two lengths of 2-conductor speaker
wire to the measured length. It is best to cut the wires longer than needed as any excess can
be trimmed later.
6.
Connect one end of one of the speaker wires to the left-channel Speaker Output five-way
binding posts on the rear panel, taking care to connect the negative side of the wire to the
negative (black) binding post and the positive side of the wire to the positive (red) binding post.
The easiest and safest method of connecting the wires to the binding posts is to use banana
plugs. If using bare speaker wire, carefully inspect each connection to ensure that there are
no stray wire strands.
7.
Connect the other end of this speaker wire to the inputs on your left-channel speaker, taking
care to match the polarity. If using bare speaker wire, carefully inspect each connection to
ensure that there are no stray wire strands.
8.
Repeat steps 6-7 for the right channel speaker wire.
6
5
PRE OUT
CD
BT
ANT
Speaker Right
Speaker Left
To CD Player
R
L
To Powered
Subwoofer
To Outlet
PRE OUT
CD
BT
ANT
BT
CD
VOLUME
MIN
MAX
MAX
ON
OFF
POWER
TREBLE
BASS
8
110V-120V 50/60Hz 2A
Made in China
Contains FCC ID: 2AFZG-BTM98-8AA
P/N
16153
110V-120V 50/60Hz 2A
Made in China
Contains FCC ID: 2AFZG-BTM98-8AA
P/N
16153