2
SAFETY WARNINGS AND GUIDELINES
Do not expose this device to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately unplug it from the power outlet and allow it to fully dry
before reapplying power.
Do not touch the device, the power cord, or any other connected cables with wet
hands.
Do not expose this device to excessively high temperatures. Do not place it in, on,
or near heat sources, such as a fireplace, stove, radiator, etc.
Prior to operation, check the unit and power cord for physical damage. Do not use if
physical damage has occurred.
Before plugging the power adapter into a power outlet, ensure that the outlet
provides the same type and level of power required by the device.
Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.
Before using this device for the first time, charge the battery for at least 6 hours, if
using the AC power adapter, or for 12 hours, if using solar panels.
Recharge the battery at least once every three months to keep the battery fresh
and capable of holding the full charge.
Recharge the battery when the LCD display indicates 20% remaining capacity.
To prevent battery damage, fully recharge the battery after each use.
