Monoprice 14886, Руководство пользователя, Страница: 9 / 16

9
If all speakers are set to the same wattage value, they will all have the same volume
level. If one speaker is set to a higher wattage value, it will be louder than the others,
while a speaker set to a smaller value will be quieter than the others. This allows you to
compensate for the environment in which the speaker is placed. For example, a speaker
placed outside would need to be louder than a speaker placed in a small room.
WIRE PREPARATION
Regardless of which type of speaker array this amp will drive, you will need to use
speaker wire (not included) to connect the amp to the speaker array.
To prepare a length of speaker wire for connection, perform the following steps:
1. Use a wire stripper (not included) to remove about 3/8" (9.5mm) of insulation
from both conductors on one end of the wire.
2. Twist the exposed wire strands to ensure that the exposed section of wire
remains in a bundle.
3. Repeat steps 1-2 for the other end of the speaker wire.