MONOPRICE
10593 Windows User's Manual
5
8. Verifying Hardware and Driver Functionality
Once the software and hardware has been installed, verify the operation and
functionality of the tablet.
a. Press the power button on top of the pen. The tablet will initiate and then the LED
indicator on the left side will flash briefly.
b. Press a button on the pen. The LED indicator will flash briefly.
c. Hover the pen over the working surface of the tablet. The LED indicator will slowly
blink and the cursor on screen will move to follow the movement of the pen.
If all three tests above pass, the pen and tablet have been properly installed and setup
on your PC.
If the tests fail, please contact Monoprice Technical Support for assistance. See section
4 above for contact information.
9. Usage Tips
The following guidelines will help obtain the best results in using this Graphic Tablet:
Double Tapping:
A quick double tap of the pen tip is the equivalent of a double-click
on a mouse.
Scrolling:
The pen can be used to perform the same scrolling function available
with an ordinary wheel mouse.
Using With A Mouse:
In addition to the tablet and pen, you can also have a mouse
connected and installed. However, only one device will function at a time. Do not
connect more than two input devices at the same time as it could cause the cursor to
jitter or freeze.
Power:
It is recommended to power off the pen and tablet when not in use.
Storing:
Do not store the pen in such a way that pressure could be applied to the tip.
When not in use, store the pen in a pen holder or place it horizontally on a flat
surface. When storing for a long period of time, remove the pen tip using the
instructions found in section III below.
Содержание 10593
Страница 1: ...MONOPRICE 10593 Windows User s Manual ...
