Important! The installation operations must be carried out by suitably trained personnel taking into account the
information given by this manual.
TECHNICAL INFORMATION:
POWER
LITHIUM BATTERY AA 4x1,5V
MIN/MAX PRESSURE OF USE
0,5÷8 bar (recommended 3 bar)
MAXIMUM TEMPERATURE OF USE
60°C
SENSOR DISTANCE
10 cm ± 2 cm
WATER FLOW
6 L/min con 3 bar of pressure
FLEXIBLE CONNEXION
G 1/2" Female
FLEXIBLE LENGTH
40 cm
NON RETURN VALVE
Included
LOW BATTERY SIGNAL
yes
ANTI VANDALIC SYSTEM
yes
MAIN DATA SYSTEM
Field sesitivity
100mm ± 20mm (Non-adjustable)
Auto-closing valve
The ignition, avoiding water escaping.
Maximum opening delay
400msec (depending on the pressure)
Closure delay (Comfort time)
Standard: ~6 sec ± 1 sec
Auto-closure for blinding sensor (Antivaldalic)
Standard: ~1min
Anti-legionella distribution
Automatic Operation after 24 hours of Unuse
Tensione delle batterie sotto 5,2Vdc
The system not allows the valve’s opening
RED Led for low battery status signal. For each action on user request, if the battery is no longer able to activate the valve, the LED flashes.
LED on fixed at start to show the correct connection. At each opening and closing control valve a short flashing of the LED. In case of
almost discharged batteries, indication with 3 flashes. In case of exhausted batteries indication with 6 flashes.
Reverse polarity Protection.
Algorithmic Correction of sensor response to the sudden variation of ambient temperature.
The sensor is equipped with a system of minimization of electromagnetic disturbances.
4,5
50
18
51
64
84
~3
20
O
40,5
WARNINGS:
-For use with water only
-Only for indoor use
-Do not use toxic or abrasive products to clean the faucet
MAINTENANCE:
Important! Any maintenance operation must be carried out by suitably trained personnel taking into account the
information given by this manual.
Periodically Wipe the sensor with a mild damp cloth.
Periodically Clean the filter of the shut-off tap in the supply line.
DISPOSAL OF POLLUTING MATERIAL:
In case of maintenance or demolition of the product, the parts of which it is composed must be entrusted to
companies specialized in the disposal and recycling of industrial waste, in transposition of the European Directive
2012/19/EU (WEEE) concerning the disposal Electrical and electronic equipment and, in particular:
-DISPOSAL OF THE PACKAGING:
The packaging consists of biodegradable cardboard that can be delivered to companies for the normal recovery of
cellulose.
-DISPOSAL OF METAL PARTS:
The metallic parts are recoverable from the companies specialized in the metal scrapping sector.
MAIN DATA BATTERY HOLDER
Supported batteries
4 lithium primary batteries type AA 1,5V
Protection class
IPX5
