13
(relay click) and the STATUS LED will change from red to white.
If the DC offset is not acceptable the MCU will power down the
amp and show an offset failure. If the amp consistently shuts
down during power up due to offset failure, please contact
Monoprice
™
Technical Support.
Notes:
•
You can change the selected input and selected DAC
source while the amp is powering on.
•
We recommend setting the volume level to minimum
during power on.
•
After the STATUS LED changes from red to white and
the headphones are connected, all normal amp
features should be operational.
EU Compliant Auto Shutdown
To comply with EU Regulation (EC) No. 1275/2008, this amplifier
features an auto-off function, which is enabled or disabled
using the AUTO/OFF switch on the rear panel. When the switch
is placed in the OFF position, there is no effect on the
amplifier's operation. When the AUTO/OFF switch is placed in
the AUTO position, the MCU monitors the selected input for a
valid audio signal.
