Monogram ZV1050, Руководство пользователя

Страница: 6 / 24

6
49-80513-5
METAL GREASE FILTER
Clean the grease filter after 30 hours of “on” time. A red
signal light will alert you when 30 hours has passed.
Remove the grease filters and wash them either by hand
or in the dishwasher using nonabrasive soap.
To clean, swish the filters in hot soapy water or wash them
in the dishwasher. Do not use abrasive cleansers.
Replace the filters and make sure that they are correctly
seated in the filter channels. Adjust as necessary until the
red signal light stops glowing.
CARE AND CLEANING
FOR YOUR SAFETY
Before servicing or cleaning the unit, switch power off at
the service panel and lock the service panel to prevent
power from being switched on accidentally. If the service
panel cannot be locked, securely fasten a prominent
warning device, such as a tag, to the service panel.
NOTE: To remove filters,
push them back and
down using the knob.
Front
For proper operation, make sure the filters
are securely seated into the channels.
HOOD SURFACES
Do not use a steel-wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm, sudsy
water or a stainless steel cleaner or polish. Always wipe
the surface in the direction of the grain.
Follow the cleaner instructions for cleaning the stainless
steel surface. To inquire about purchasing stainless steel
appliance cleaner or polish or to find the location of a
dealer nearest you, please visit our website:
monogram.com