
How to Set Oven for Cleaning
Quick Reminder:
1. Prepare the oven for cleaning.
2. Close the oven door completely.
3. Press the CLEAN pad.
4. Press
INCREASE or DECREASE pad
until desired Clean Time appears.
If the oven is too hot and you start to set a clean cycle,
the word
will appear in the display. Allow
time for cooling before you try to
set the cycle.
NOTE: Only one oven at a time can be self-cleaned.
1. Follow directions to prepare the oven for cleaning.
❑
CLEAN
❑
A
❑
2. Press the CLEAN pad.
3. Press the INCREASE or
DECREASE pad until desired
Clean Time is displayed.
Clean Time is
3 hours. You can
change the Clean Time to anywhere
between 2 and 4 hours, depending on how
dirty your oven is.
The self-clean cycle will automatically begin after
“CLEAN” is displayed and
time for the Clean
cycle is set. The words “ON” and “LOCK”
appear on the display. It will not be possible to open
the oven door until the temperature drops below
lock temperature and
LOCK light goes off.
4. When
LOCK light is off, open
door.
n
NOTE: You can find out when the clean
STOP
will be
finished by pressing
The word “door” will be displayed, the word “LOCK”
will flash and oven control will signal if you set the
clean cycle and forget to close
oven door.
To Stop a Clean Cycle
❑
1. Press the
pad.
2. Wait until the oven has cooled below locking
CLEAR
temperature. You will not be able to open the
OFF
door right away unless the oven temperature is
at a safe level.
(continued next page)
31