IX. USER SAFETY REQUIREMENTS
READ CAREFULLY
WARNING
: It is the responsibility of the user to enforce the country regulation and the specific environment regulation.
WARNING
: This product is not certified for use in hazardous location (HAZLOC) where there is a risk of explosions.
WARNING
: IF THE SENSOR IS USED IN A MANNER NOT SPECIFIED BY THE MANUFACTURER, THE
PROTECTION PROVIDED BY THE EQUIPMENT MAY BE IMPAIRED.
Do not disassemble the product; any mark of
tampering will compromise the warranty validity. We recommend following the instructions of this user guide for
correct setup and use of the product. Please handle the product with care, avoiding any dropping and contact with
the internal circuit board as electrostatic discharges may damage the product.
WARNING
: The device has a mechanical stress rating of
IK06,
meaning its housing and/or its readings could be
compromised by an impact with greater energy than one Joule.
DO NOT
rely solely on the gateway to prevent: (1) one
or more fatalities; (2) disabling injury or illness; (3) chemical release with acute or public health impact; (4) chemical
release with temporary environmental or public health impact; (5) system or facility loss; and/or, (6) major subsystem
loss.
Justification of
a
mechanical impact rating less than five Joules exists by: (1)
a
documented Risk Analysis performed
and maintained by Monnit; (2) installation of the sensor in locations that cannot easily be touched by unauthorized
persons or the general public; (3) the equipment being only accessible in normal use for occasional operations such
as adjustment, programming, or maintenance.
Note: Every device has to be equipped with a proper antenna with specific characteristics. The antenna has to be
installed with care in order to avoid any interference with other electronic devices and has to guarantee a minimum
distance from the body (23 cm). In case this requirement cannot be satisfied, the system integrator has to assess the
final product against the SAR regulation.
Industrial-Grade Products
I
Type 1, 2, 4, 4X, 12, and 13 NEMA-Rated Enclosure
Industrial products are enclosed in reliable, weatherproof NEMA-rated enclosures. Our NEMA-rated enclosures are constructed for
both indoor or outdoor use and protect the Site Survey Tool circuitry against the ingress of solid foreign objects like dust and the
damaging effects of water.
•
Safe from falling dirt
•
Protects against wind-blown dust
•
Protects against rain, sleet, snow, splashing water, and hose-directed water
•
Increased level of corrosion resistance
•
Remains undamaged by ice formation on the enclosure
Monnit, iMonnit, and all other trademarks are property of Monnit, Corp.© Monnit Corp. All Rights Reserved.
SS-ST-AUG (10/22)
