background image

- 20 -

- 21 -

Safety Instructions

  The charger adapter is designed for indoor use only and must not be exposed 

to humidity.

  Never attempt to open the PowerPacks, as there are no consumer serviceable 

or replaceable parts. Improper handling of the lithium-ion batteries can lead 

to an explosion.

  Never attempt to modify your heated apparel, especially in the heating 

component areas.

  Check your Products regularly for signs of wear and tear or system anomalies. 

If you suspect a problem, contact Inuheat’s Customer Service Team for 

troubleshooting guidance : www.inuheat.com/support.

  Damaged PowerPacks, Charger Adapters or USB cables must be retired from 

service and properly disposed of immediately.

  Keep the PowerPacks away from fire and extremely high temperatures to 

avoid the risk of an explosion.

  Do not attempt to modify the hardware or firmware in the PowerPacks.

  Only the manufacturer is authorized to repair the Products.

  The Products are not certified for use in medical applications.

  Do not attempt to use the Products on animals.

  Do not attempt to use the Products with any other heating products in the 

same area of the body to avoid potential burn scenarios.

  For long product life, it is always recommended to take your time putting 

on and taking off your heated garments. Avoiding wringing and aggressive 

pulling on the heating and conducting material areas (for example, after 

washing) is a good investment in the health of your heated Products.

  It is recommended to flatten out the fabric in your heated product to minimize 

wrinkles and pressure points which could become uncomfortable or cause 

excessive heat to be concentrated into small areas.

Monnet brochure chauffante 48p 155x195 06-20.indd   21

22/06/2020   12:57

- 22 -

- 23 -

Charge the PowerPacks

Attach the 2 PowerPacks to the USB charger adapter. Connect the 

USB charger adapter to a USB power supply (not supplied).

With a USB power supply with 

a power of 3 amps, the normal 

charging time is 3 hours, 

with 80% of the total charge 

reached in 1 hour. PowerPacks  

can be left on the charger after 

charging is complete.

LED Charging Patterns

Attach the PowerPacks

When the socks are on your feet, attach each PowerPack to the 

connector at the top of the socks.

Fold the top cuff of the sock over the PowerPack to hold it firmly 

in place.

STATUTS

COLOUR

LED

Charging

Yellow

•     •     •

Charged

Green

Monnet brochure chauffante 48p 155x195 06-20.indd   22

22/06/2020   12:57

Содержание HeatProtech 3200


















Отзывы: