17
ENGLISH
FEATURES
REAR PANEL
1. Input Gain – This Potentiometer controls the pre-amplification of the Input SIgnal.
( Before operation, please set this Potentiometer to ( -∞ ), then turn it clockwise slowly up.
2.
Signal Led
3.
Peak – Led > 22dBu
4. Preset – Tab. Push this tab to browse the presets. By pushing one time the preset will automatically
change to the next one. The Silverback offers 5 different presets to adjust the speaker to different
listening environments and applications.
5. Preset-LED – Shows the preset currently loaded.
6. Low Cut Filter – Pushing the Tab activates a Low Cut Filter with 24sB/Oct. @ 85 Hz.
7. LOW CUT LED – Illuminated when Low Cut Filter is activated
8. Input – balanced XLR Input Socket – Connezt this input with the output of a Audiointerface, Mixer,
Monitorcontroller or other Line SIgnals
9. Output/Thru - balanced XLR Output/Thrue connector – Connect this output to slave the input signal to
other devices.
10. Developer Interface – Access only for Manufacturer.
11. Power Switch – This switch powers on/off the speaker
12. AC Inlet : This socket accepts a standart IEC-type power cable.
FRONT PANEL
13. 2-way 15“/3“ coaxial high performance driver
14. Vent Ports
Choose this preset if you are monitoring in a big or large size
listening environment.
Choose this preset if you are monitoring in a small to mid size
listening environment.
Choose this preset for better low end judgement or when you place
the speaker free in the room ( more far away from walls ect.)
Choose this preset to simulate how your mix will sound in a Club
Choose this preset if you like to listen to a linear frequency response
during monitoring.
