Monitor Home Protection System and Monitoring Service Скачать руководство пользователя страница 18

Страница: 18 / 32

PROGRAMMING OPTIONS

The following table is a list of options you can change.

Press

Add

in the

START MENU

and follow the voice prompts to turn an option on.

Press

Delete

in the

START MENU

to turn an option off.

When entering a single digit option number (1-9), you must type a zero before the number (i.e. 01, 02 ...). All option
numbers must be 2 digits.

•

OPTION 01- PANEL BEEPS

Add

this option to enable panel beeps. These are any beeps (including chime beeps) that come from the panel.

See “Panel Beeps”.

1. Open panel cover. Panel announces,

Use numbered keys to enter ID.

2. Enter Master Access Code using the numbered keys. Panel announces,

Please select from Start Menu.

3. Press

Add

from the Start menu. Panel announces,

Select from main menu.

4. Press

Option #

. Panel announces,

Option 1, press again for next option or done to select

5. Press

DONE

. Panel announces,

Option 1 is on

Delete

turns off panel beeps.

1. Open panel cover. Panel announces,

Use numbered keys to enter ID.

2. Enter Master Access Code using the numbered keys. Panel announces,

Please select from

Start Menu.

3. Press

Delete

from the Start menu. Panel announces,

Select from main menu.

4. Press

Option #

. Panel announces,

Option 1, press again for next option or done to select.

5. Press

DONE

. Panel announces,

Option 1 deleted.

•

OPTION 02 - PANEL VOICE

Panel Voice may be disabled, except for status messages, open sensor responses, and when in program mode.

Add

enables the panel voice.

1. Open panel cover. Panel announces,

Use numbered keys to enter ID.

2. Enter Master Access Code using the numbered keys. Panel announces,

Please select from Start Menu.

3. Press

Add

from the Start menu. Panel announces,

Select from main menu.

4. Press

Option #.

Panel announces,

Option 1, press again for next option or done to select.

5. Press

. Panel announces,

Option 2, press again for next option or done to select.

6. Press

DONE

. Panel announces,

Option 2 is on

Option #

Add

Delete

01 - Panel Beeps

Off

02 - Panel Voice

Off

03 – Latchkey Time

Not available

36 and 37 – Sensor light lock out times

Not available

41 – Chime Voice

Off

42 – Speaker Volume

1-8

8 (highest)

43 – Pager Phone Number

Not available

55 – Status Beep Volume

1-10

35296 SSE User Guide 16/1/07 12:08 Page 18

Содержание Home Protection System and Monitoring Service

































Результаты поиска

Содержание Home Protection System and Monitoring Service

Отзывы:

Похожие инструкции для Home Protection System and Monitoring Service

Бренды по названию

Популярные бренды

Monitor Home Protection System and Monitoring Service, Руководство пользователя

Результаты поиска

Содержание Home Protection System and Monitoring Service

Отзывы:

Похожие инструкции для Home Protection System and Monitoring Service

Бренды по названию

Популярные бренды