background image

spIked foot assembly

for Carpeted floors 

The Silver RX spiked foot assembly encorporates a spike for use on carpeted floors and also, a 
soft polymer pad (for use on wooden or tiled floors).  

Please ensure there are no hidden wires under the carpet that could be damaged by the 
spikes.

The  foot  comes  fully  assembled  for  use  on 
carpeted floors.  All that is required is fixing into 
the bottom of the cabinet.  This is achieved by 
simply screwing the feet fully into the 4-threaded 
insert  in  the  underside  of  the  cabinet.    If  your 
carpet  has  a  very  thick  pile,  remove  the  soft 
polymer  pad  from  the  foot  to  ensure  the  spike 
goes right through the carpet into the floor.  With 
great  care  turn  your  cabinet  the  right  way  up.  
Place  the  cabinet  in  your  desired  location,  and 
check that it is level on all sides.  If it is slightly 
uneven,  unscrew  the  spike  at  the  lowest  point 
and check again.  
Continue  this  process  until 
the  cabinet  is  fully  level.  
Use  the  locking  nut  on  the 
foot  to  fix  the  foot  in  place 
and  to  stop  any  unwanted 
vibrations. 

re-CyClIng

Correct Disposal of Waste Electrical and Electronic Equipment (WEEE) by User 
in Private Households in the EU.
This  symbol  on  the  product  or  accessories  indicates  that  they  must  not  be 
disposed of with your household wastes throughout the EU. To prevent possible 
harm to the environment or human health from uncontrolled waste disposal, 
recycle it responsibly to promote the sustainable reuse of material resources. 
Instead it is your responsibility to dispose of your waste equipment by handing 
it  over  to  a    designated  WEEE  collection  point  for  recycling.  The  separate 
collection and recycling of your waste equipment will help conserve natural resources and ensure 
that it is recycled in a manner that protects human health and the environment. 
For more specific information about where you can take your equipment for recycling please contact 
your local city/council office, your local waste disposal service or the outlet where you purchased 
your Silver RXW-12 product.

roHs deClaratIon of ConformIty

Directive  2002/95/EC  of  the  European  Parliament  and  of  the  Council  on 
the  reduction  of  the  use  of  certain  hazardous  substances  in  electrical  and 
electronic equipment, January2003.

background

The  RoHS  directive  restricts  the  use  of  Lead  (Pb),  Cadmium  (Cd),  Mercury  (Hg),  hexavalent 
Chromium (CrVI), polybrominated biphenyl (PBB) compounds, and polybrominated diphenyl ether 
(PBDE) compounds in electrical and electronic equipment sold in the European Union. 

unpaCkIng 

Care must be taken at all times when handling the RXW-12 due to the weight of 
the product. We recommend a two-person lift wherever appropriate. 

A feature of the RXW-12 is the exposed drive unit. Great care must  be exercised 
at all times to ensure it is not damaged during unpacking and when finally sited in 
the room. Any physical damaged caused to the drive unit by not complying with 
this requirement will not be covered by warranty.

The mains power cord(s) and feet assemblies are contained separately in the packaging and should 
be removed prior to unpacking the product.
To  remove  the  RXW-12  from  its  carton  place  some  protective  material  on  the  floor  and  having 
removed any loose items (mains lead(s) and feet) from the top of the packaging, carefully invert the 
carton. Also see the icons printed on the carton.  Gradually pull the carton upwards to expose the 
subwoofer, which will be presented with its base uppermost.  Remove fixing tape from bag and 
expose the base/cabinet.  Before turning your RXW-12 over so that it is the correct orientation, you 
must decide how you will be using the feet:

spiked foot fixing for Wooden/Hard floors 

For use on solid floors or where spikes are inappropriate, it is possible to use 
the foot without the spike.  To use the foot in this manner carefully grip the 
knurled portion of the spike and rotate anti clockwise to unscrew the spike 
fully.

You may find it easier to first remove the polymer pad so as to gain more 
purchase on the spike.

The  pad  should  be  replaced  before  carrying  out  the  levelling  operation 
previously described.

Locking Nut

Main  Threaded 
Assembly

Spike

Polymer Pad

monitoraudio.co.uk

5

Silver RXW-12

4

RXW12 manual.indd   4-5

18/08/2009   10:04:07

Содержание SILVER RXW-12












Отзывы: