11
© Monitor Audio 2005 RS Rev 5
Fixing Your RS FX to a Wall
CAUTION: You will need to determine where the RS FX will be fixed and the
structure of the wall. For safety reasons, if you are unsure of your ability to
provide a secure and safe fixing, do not attempt to fix these speakers to your
wall, please obtain the services of a competent qualified tradesperson.
CAUTION: Ensure that there are no water pipes or electricity cables running
behind where the wall brackets are going to be secured. Work from secure
steps and avoid trailing wires.
To fix your RS FX’s to the wall, follow these simple instructions. We would
recommend using the wall fixing template enclosed within the packaging
carton:
1.
When you are sure of the location of your RS FX, mark on the wall the
centres of the securing screws. These should be 220mm (8
11
/
16
") apart.
2a.
For fixing to plasterboard (sheet-rock) or a solid wall use a suitable
6.5mm (
1
/
4
") drill bit. Drill the two positions (each speaker) deep enough
to accept the enclosed wall plugs. This should be 30mm (1
3
/
16
"). Insert
the wall plugs and screw the provided 33mm (1
5
/
16
") screws into the wall.
Remember to leave the screws protruding approximately 1mm (
1
/
32
")
(excluding the head of the screw) to hang the RS FX on.
2b.
For fixing to a timber wall, drill a pilot hole (approx 2mm or
1
/
16
") and
screw the 33mm (1
5
/
16
") screws into the pilot hole. Remember to leave
the screws protruding approximately 1mm (
1
/
32
") (excluding the head of
the screw) to hang the RS FX on.
Both the key-hole bracket and the rubber
adhesive pads can be seen in the
photograph to the right.
3.
Hang your RS FX on to the screws and sit
back and enjoy.
For recommendations on where to hang your RS
FX please refer to the FAQ’s on our web site:
www.monitoraudio.co.uk
Key hole brackets
Adhesive Rubber Pads
Содержание Silver RS
Страница 14: ...14 Monitor Audio 2005 RS Rev 5...
