Monitor Audio Monitor Reference MR Centre, Руководство пользователя

Страница: 8 / 14

Amp Panel & Controls for MRW-10
Type of Main Speaker Monitor Reference Series Product Crossover Control Setting
Small stand-mount/ bookshelf
speaker
MR1/ MR2 60-100 Hz
Floor Standing Speaker MR4/ MR6 40 - 80 Hz
Monitor Reference Series 6
Notes:
1. ICONS/TEXT TO BE SILKSCREENED
IN WHITE - RAL 9003
2. IMAGE FOR REFERENCE PURPOSES ONLY.
3. DO NOT SILK SCREEN TEXT
IN RED -
FOR REGERENCE PURPOSES ONLY.
.
.
.
.
.
. .
.
.
.
.
.
L
R
LFE
50 Hz 120 Hz MIN MAX
INPUT TRIGGER
FREQUENCY
BASS PHASE MODE
VOLUME
IMPACT
MOVIE
POWER
ON
OFF
ON
AUTO
MUSIC
110 - 120V~
220 - 240V~
12V
DESIGNED IN THE UK, MADE IN CHINA
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
ATTENTION: AFIN DE RÉDUIRE TOUT RISQUE DE CHOC
ÉLECTRIQUE, NE PAS RETIRER LE COUVERCLE
(OU CAPOT ARRIERE), NE CONTIENT PAS DE PIECES
REPARABLES PAR L’UTILISATEUR CONFIER TOUT
ENTRETIEN À UN PERSONNEL QUALIFIÉ.
a MONITOR AUDIO
Product: BRONZE 5G W10 V2
Date:17th DECEMBER 2013
UK/EURO/US VERSION
AC110-120V ~ 50-60Hz
AC220-240V ~ 50-60Hz
200 W
FUSE: 110-120VAC T4AL/250VAC
FUSE: 220-240VAC T4AL/250VAC
1
2
4 5 6 7 8
9
11
10
10a
3
1. RCA Stereo Inputs (Left & Right)
This is the method of signal input when using a stereo amplifier system, connection can be provided by a pair of high-
quality signal cables from the pre-out section of an amplifier. The crossover frequency will need to be set if using this
method of connection. If using the Bronze Series speakers set the crossover dial to approximately 80Hz. This may vary
depending on room and tastes.
Note:- cable lengths should not exceed 10 metres to avoid interference from other electrical appliances.
2. LFE Input (RCA Type)
This input is to be used when connecting the subwoofer to an AV amplifier/ receiver. When using the LFE input, the crossover
frequency dial is not used. This is due to the crossover function being controlled by the AV amplifier/ processor to which
it is connected.
3. 12 Volt Trigger Input ~ Centre Pin = +12Vdc
For external power control from AV amplifier/ receiver to the MRW10. Monitor Audio recommend using this function and a
lead is supplied. A 12 volt signal is supplied by the AV amp/receiver and tells the MRW10 to turn on from standby mode.
This allows a more accurately controlled auto on/off function, and is far more energy efficient. When using the 12v trigger,
the Mode Switch (8) can be in either position, for it to function correctly.
4. Crossover Frequency Control
The crossover frequency control only operates when using the RCA stereo input (1) and is used to set the upper frequency
limit (low pass) of the subwoofer. The crossover control should be set in accordance with the size or bass output of the main/
satellite speakers. When using the Bronze Series speakers, set this to between 50 - 100Hz (depending on additional speakers).
Experimentation is advisable.