Feed the speaker cable into the bracket
and out through the cable exit hole. Place
the CLG140/ CLG160 (i) onto the bracket and fit the
grub screws (ii) but do not fully tighten. Adjust the
CLG140/ CLG160 to the desired direction/ angle
and tighten the four mount screws (refer to step 1)
followed by the grub screws (ii) to secure in place.
Fix the base of the mount to the intended
location with a single screw (i), then
insert the ball fixing arm and top half of the mount
assembly, attach loosely with four screws (ii).
CLG140/ CLG160 - Wall Mount
CLG140/ CLG160 - Tree Mount
HINT: To assist in threading the speaker cable
through the mount we would advise having the
ball fixing arm angled upwards.
i
ii
i
ii
A tree belt (not included) can now be
threaded through the opening in the sides
of the mount. Wrap this around the intended tree and
fasten the belt tightly to prevent movement.
Assemble the two halves of the mount
with the ball fixing arm in the middle and
secure it together using the supplied nuts and bolts
supplied with the mount.
2
2
1
1
Climate Garden Series
4
