3
i
ii
First screw the threaded section supplied
(i) onto the CLG140/ CLG160 speaker, once
secure thread the cables attached to the speaker
through the hole in the spike before attaching the
spike to the threaded section (ii).
Dig a shallow trench along the path of
where you wish to run the speaker cables.
1
Once assembled, the speaker
can now be installed in the
desired location.
The pivot angle of the CLG140/
CLG160 can be adjusted using
an allen key.
Note: It is advised to hold the
speaker from the spike whilst
doing this so that no pressure is
placed on the pivoting section.
CLG140/ CLG160 - With Spike
NOTE: Ensure the system is tested and working correctly before filling in around the subwoofer and cable tenches.
monitoraudio.com
3
4
Connect speaker’s cables in parallel with
the main run of cable from the amplifier
combining all positive cable together and all
negative cables together.
To Next speaker
To CLG140/
CLG160
From previous
speaker/ amp
Connections
should be made
with either
silicone filled
wire connectors
(example
opposite) or appropriate weather proof junction box
(not included).
Note: Ensure that no ‘-’ and ‘+’ strands are
touching each other as this will cause a short
circuit that could damage your amplifer.
2
ENGLISH
