Monitor Audio ASB-10, Руководство пользователя

Страница: 5 / 11

Remote
1. Standby
Used to put the ASB-10 in and out of standby mode.
2. Volume Up
Used to increase the volume of the ASB-10.
3. Previous Track
Used to select the previous track of the audio source.
4. Volume Down
Used to reduce the volume of the ASB-10.
5. Mute
Used to mute the sound from the ASB-10. Pressing it again returns the
volume to the previous level.
6. 3D Sound
Used to enable Dolby® Virtual Speaker 2.0, which changes the sound of
the ASB-10 to create a 3 dimensional effect Holding it down for 3 seconds
whilst in standby mode will enable the LED brightness control.
7. Play/ Pause
Used to play/ pause the audio from a Bluetooth source.
8. Next Track
Used to select the next track of the audio source.
9. Source Toggle
Used to toggle through the various analogue and digital inputs.
1 6
7
8
9
2
3
4
5
Getting Started
Deciding on location
The ASB-10 is a very versatile product, it can be placed on a cabinet/ shelf siting it on the supplied rubber feet. It can also be mounted to a wall using screws, which
the ASB-10 will hook onto via keyhole fixings. It can also be mounted below a flat panel TV using the Sanus VMA202 Soundbar Speaker Mount. Refer to www.sanus.com
for further information.
Rubber Feet
The ASB-10 comes with a rubber feet for fitting on the under side of the cabinet. This is used to prevent it from moving when placed on a shelf or cabinet.
4 ASB-10