www.monilu.eu
4
Place the waist belt on your belt. Pull the buckle through the safety rubber band , fasten the buckle and secure
the safety lock and tight the belt. Don't underestimate this
triple safety system
!
Place the baby on your belly,
facing towards you. Keep in mind that correct ergonomic position is with baby’s
bum slightly covering the waist belt, legs well spread and knees risen above the bum level. Once positioned,
rise the back support part over the baby’s back and wear the should
ers straps, one by one. Fasten the back
buckle afterwards and adjust the length of the back strap if needed.
Grasp the baby's knees and, by pulling
child up, place it firmly in the fabric of
the back support.
Pull the back support toward baby’s
shoulder. Tighten or loosen the shoulder
straps as you need.
Adjust the width of the back support
under the child's neck using a rubber
band under the hood.
