Monicon Instruments Co, LTD.
Monicon Instruments Co, LTD.
Monicon Instruments Co, LTD.
Monicon Instruments Co, LTD.
CHR
CHR
CHR
CHR-
-
-
-14
14
14
1424
24
24
240/26
0/26
0/26
0/2624
24
24
240
0
0
0
Important Safety Guide
Important Safety Guide
Important Safety Guide
Important Safety Guide
Warning: Risk of electric shock:
Please Read safety and warning guide before operating battery charger, users are
responsible for any regulations required by special applications. Please do not
connect AC or DC power before installation.
1. Do not expose the charger under rain, snow, moist, water, or dust condition. To prevent
over heating, do not block ventilation area or installed in a sealed case.
2. The design of charger is capable of continuous connection to AC and DC power system.
3. Please read manual and warning messages before using the charger and battery.
4. Please use only factory parts and suggested accessories. Unauthorized parts may risk
of shock, fire, or injury.
5. Please do not disassemble charger. Attempting to repair machine may risk of fire and
shock. Even the power is removed; the charger still contains residual electricity.
6. To prevent the risk of shocks, please remove AC, DC power and switch off controller
before cleaning, maintenance, or installation.
7. Please do not use charger, if explosion, damage, or drop of charger occurred.
8. To prevent risk of shock and fire, please use correct wire gauge. Do not use damaged
or low grade wire.
9. After connected to AC power, we advice wait for 10 seconds for green power LED to
lit up, then connect to the lead acid battery.(note: this is a warm up procedure)
10. The battery voltage must be higher than the minimum charging voltage. Otherwise the
charger automatically detects battery error and stops charging and the red error Led
lit up.
