Moni QY1988, Руководство пользователя

Страница: 16 / 20

15
Charging of the rechargeable battery
1. Before use for the first time you must charge the rechargeable battery for 16 hours, but no more than that. The battery
must be charged by an adult only. Never allow a child to charge the battery.
2. Before plugging the adaptor for charging of the battery, you must turn off the power button.
3. When the normal speed of the SUV starts to significantly decline or after each use of the product, charge the battery for 4
– 6 hours, but never more than 10 hours.
4. Check the battery, charger and their connectors and cables for extensive wearing or damage every time before you start
charging the battery. If you find any wearing or damage, do not use the charger or battery until the worn or damaged part is
replaced.
5. The battery must be charged in dry areas only.
6. It is normal for the battery and charger to become warm during charging.
7. Charge the battery at least once a month, even if the motor has not been used.
8. At room temperature under 5 degrees Celsius, the charging must take 3-5 hours more. Please, do not use this product
under - 5 degrees Celsius.
PARTS LIST
Before you start to assemble the battery-operated SUV, take the parts out of the packaging and check whether all parts
indicated in the list below are present. Keep the packaging until you have completely finished the assembly. See Figure PD
on Page 1: A
– SUV’s body; B – Steering wheel; C – Seat; D – Rearview mirrors; E – Wheels; F – Gearbox with motor; G –
Rear axle; H
– Stickers for the wheels.
ASSEMBLY STEPS
1. Front and rear
wheels’ installation – See Figures 1a and 1b:
Distinguish the front wheels from the rear ones.
- Front wheels: Take one of the wheels and press the button in the middle of the wheel. Slide the wheel onto the axle until
the end of the visible part. Release the button. You will hear a clicking sound, showing that the wheel is fixed. Pull the wheel
towards you to check if it is fixed well. Attach the other wheel the same way. And then attach the Mercedes-Benz stickers to
the buttons in the middle of the wheels.
-
Rear wheels: Take one of the wheels and press the button in the middle of the wheel. Slide the wheel onto the axle until
the cogwheel of the gearbox. Fit the cogwheel of the rear wheel to the cog wheel of the gearbox. Release the button. You
will hear a clicking sound, showing that the wheel is fixed. Pull the wheel towards you to check if it is fixed well. Attach the
other wheel the same way. And then attach the Mercedes-Benz stickers to the buttons in the middle of the wheels.
2. Connecting the battery
– See Figure 2:
Connect the cables of the SUV to the
battery’ terminals. The red cable must be
connected to the red terminal and the black cable to the black terminal. Follow the correct polarity. Never connect black
cable to red terminal or vice versa. This may lead to short circuit.
3. Attaching the steering wheel
– See Figure 3:
Connect the steering
wheel’s cable to the SUV’s cable. Then place the
steering wheel on the corresponding holder on the dashboard. Press the ball buttons of the steering wheel and slide the
steering wheel down the holder until the buttons fix in the corresponding holes in the holder.
4. Installing the front windshield
– See Figure 4:
Place the front windshield in the front part of the SUV body. Align the
plastic pins of the windshield to the openings in the SUV body. Press until it is fixed. WARNING! Do not press too hard as
you may break some of the parts.
5. Fixing the rearview mirrors
– See Figure 5:
Place the rearview mirrors in the corresponding openings on the doors.
Press carefully until they are fixed.
6. Attaching the seat
– See Figure 6:
Place the seat at the rear part of the SUV. THE PLASTIC PINS OF THE SEAT
MUST BE FIXED into the corresponding openings in the
SUV’s body. Fix the rear part of the seat with 4*14 mm screw and
screwdriver.

Notice:
1. When you change the direction of movement, first make sure that the SUV does not move. Otherwise, if you change
suddenly the direction of movement without stopping the SUV, you may cause damage of the gears and motor.
2. If you are using the remote control, follow the guidelines inn this instruction manual.

Operation and Functions
– See Figure U:
1. Music MP3 player; 2. P
– ON/ OFF Button; 3. F/B – Forward/ Backward
switch; 4. FP
– foot pedal; 5. CS – charging socket.
1. Push the ON/ OFF button to start the SUV.
2. Put the Forward/ Backward switch in position Forward and press the pedal in order to move the SUV forward.
3. Put the Forward/ Backward switch in position Backward and press the pedal to move the SUV backwards.
4. Stop
– Lift your leg from the pedal in order to stop the SUV from moving.
5. On the dashboard you will find and the music MP3 player. See the table below for the functions of the different buttons:
USE OF THE BATTERY-OPERATED SUV
VOL - Press for a short time
Switch to the
previous song
Press for a
long time
Volume
down
The power button
must be on.
SCAN Press for a short time Pause/ play