Moni PRIDE, Инструкция по эксплуатации

Страница: 13 / 16

12
PARTS LIST AND DIAGRAM
Before you start to assemble the battery operated car, take the parts out of the packaging. Check if all parts are present.
Keep the packaging until you have completely finished the assembly.

See Figure PD: B
– car body – 1 pc; FW – front wheels – 2 pcs; RW – rear wheels – 2 pcs; SW – steering wheel – 1 pc;
S
– seat – 1 pc; RM – rearview mirrors – 1 set; FS – windshield – 1 pc; FL – front lights;
1.Step 1
– Attaching the front wheels – Figure A:
Attach a M10 washer on each side of the front axle. Then attach the
front wheels. Place again a M10 washer to the ends of the front axle coming out of the wheels. Slide a split pin in the holes
on each end of the front axle. Bend their ends using long nose pliers. Then fix the wheel hubs.
2.Step 2
– Attaching the rear wheels - Figure B:
Attach the rear gearboxes with the motors to the rear axle. Connect the
cables of the motors with those coming out of the car body. Attach the rear wheels to both sides of the axle. The cog wheels
of the wheels must fit completely to those of the gearboxes. Attach M10 washers on each side of the rear axle end. Slide a
split pin in the holes on each end of the rear axle. Bend their ends using long nose pliers. Then fix the wheel hubs.
3.Step 3
– Fixing the seat – Figure C:
Take the seat and insert its plastic pin the corresponding hole in car body. Align the
holes on the seat and car body for the fixing screws. Insert through these holes 2 4x12 screws with flat heads. Fix them
using a screwdriver.
4.Step 4
– Attaching the steering wheel – Figure D:
Connect the bushing of the steering wheel and the bushing of the
car. Place the steering wheel in the upper end of the steering shaft, which comes out of the
car’s body. Align the openings of
the steering wheel and the steering shaft, designated for the fixing screw. Insert the machine screw through the openings of
the steering wheel and steering shaft and fasten it with the nut and the screwdriver.
5.Step 5
– Attaching the front windshield – Figure E:
. Place the front windshield in the corresponding part in the car
body. Insert the plastic pins of the windshield in the corresponding openings of the car body. Press carefully down until it
clicks in place.
6Step 6
– Attaching the rearview mirrors:
Place the side mirrors at their intended positions on the
car’s body. Press
carefully down, until the click in place.
7.Step 7
– Connecting the car cables:
Connect the bushing of the red cable with the red terminal. DO NOT CONNECT
BLACK BUSHING WITH RED TERMINAL.
ASSEMBLY STEPS

Never use in the dark.Your child may encounter unexpected obstacles resulting in an accident. Use only during the day or
at places that are well lit It is forbidden to shorten the terminals of the electric cables or to add other electric parts.

Periodically check the wires, bushings and connectors.

Do not allow children to touch the wheels or be close to them, when the battery operated car is in motion.

The product has adjustable safety belts. Instruct the children to fasten their seat belts before use in order to guarantee
their safety.

Some accessories of the car may get damaged during improper driving, be careful.

DO not use suddenly the forwards/backwards switch, while the car is in motion. It can be used only while the toy is
stopped in place.

When restarting the motor there may be some sparks. It is forbidden to start the car in highly flammable and explosive
environments such as petrol stations.

An adult must read this instruction carefully and give correct guidelines to children before playing with this product. Show
them how to start and release the pedal, how to stop the car and how to act in case of malfunctions.

When you stop using the toy, turn off the power.

Do not change anything in the body and parts of the product. This may lead to destabilization of the toy and injury to your
child.

The following must be confirmed before using the product:
•
Important! Before use of the product for the first time, the battery must be charged for 12 hours, but no more than that.
Only an adult can charge and recharge the battery.
•Check regularly all screws, nuts and safety coverings and tighten them if necessary!
•Before each use check the seat. Whether it is correctly placed and mounted (installed) with the help of a screw.
•In order to avoid incidents, make sure that the battery operated car is entirely safe before use.
USE OF THE BATTERY OPERATED CAR
– FIGURE U
Notice: When you change the direction of movement, first make sure that the car does not move. Otherwise, if you change
suddenly the direction of movement without stopping the car, you may cause damage of the gears and motor. If you use the
remote control, please, follow the instructions in this instruction manual.
•
ON/ OFF Button - Start: Switch the power button on and the car must be in active mode.
•
P
– foot pedal;
•
F/O/B Button -
▲О▼ – forward/ stop/ backward:
A. Forward: Press the switch to
▲ position (forward). Press the pedal and the car will start moving forwards.
B. Backward: Press the switch to
▼ position (backward). Press the pedal and the car will start moving backwards.
•
Change of speed: only by the RC.
•
Stop: The car will automatically stop after you release the gas pedal