Moni KL-1666, Инструкция по эксплуатации

Страница: 20 / 24

19
➢
Moving Forward/ Reverse:
1. First switch the power of the car on. The music will start playing.
•
Moving Forward: Put the Forward
▲ / Backward ▼ switch in position Forward ▲ and press the pedal in order
to move the car forward.
•
Stop: Lift your leg from the pedal in order to stop the car from moving. If you switch the Forward/ backward
button into middle position, the car will not be moving as well.
•
Moving Backward: To change the direction of movement, first make sure that the car does not move. Put the
Forward
▲ / Backward ▼ switch in position Reverse ▼ and press the pedal to move the car backwards.
Do not listen to loud music, because this may lead to impairment of the hearing.
REMOTE CONTROL USE
ONLY AN ADULT CAN USE THE REMOTE CONTROL!
The use of the remote control is always with priority over the manual and pedal operation with the car.
(If you use the remote control, the pedal will not work.)
I. PLACING OF THE BATTERIES:
WARNING!
The placement of batteries should be performed in the absence of children!
1.The batteries are not included in the set.
2.Remove the screw of the lid of the battery compartment with a screwdriver and set it aside.
3.After that place 2 pcs AAA (1.5V) batteries in the compartment, make sure that you observe the respective
polarity (+/-) when you place them, it is indicated on the bottom of the compartment.
4.Replace the cover of the battery compartment and secure it with the screw.
5.The batteries must be handled by an adult. Do not allow the children to play with the batteries.
6.Warning! The placing of the further change of the batteries must be done by an adult.
II. BUTTONS OF THE REMOTE CONTROL
– SEE FIGURE RC:
- F
– Forward – press in order to move the car forward;
- B
– Backward – press in order to move the car backward;
- P
– Stop/ Pause – press to stop the car from moving;
- L
– Turn on the left– press in order the car to turn on the left;
- R
– Turn on the right – press in order the car o turn on the right;
- S
– Speed select – 3 speeds – slow, medium and fast. When the car moves backwards, it is always only in
slow speed.
- SI
– LED indicating light for the speed – 1 LED light = slow speed; 2 = medium and 3 = fast speed;
III. CONNECTING THE REMOTE CONTROL DEVICE TO THE CAR
– SEE FIGURE C:
1.Put batteries in the compartments of the remote control. Turn off the power of the car from the button on the
dashboard. Hold the Forward and Backward buttons at the same time for 3 seconds. The first speed indicator
will start flashing. Turn on the power of the car. The light indicator should stop flashing and turns to long light.
This means that the connection was successful.
2.If the connection
wasn’t successful, turn off the power of the car and repeat step 1.
3.The RC will turn into power saving mode automatically if you do not use it for 10 seconds.
4.The RC device has memory function. This means that if you change the old batteries with new ones, you will
not need to reconnect the RC device to the car.
IV. INSTRUCTION ON REMOTE CONTROL USE
1.Press button F and the car will move forward.
2.Press button B and the car will move backwards.
3.The speed button S allows you to move the vehicle with low, normal and high speed. It does not work when the
vehicle is moved backwards. One indicating light is for low speed, 2 indicating lights is for normal speed and 3
indicating lights are for fast speed.
4.Press button L for turning left and the car will turn left. Press button R for turning right and the car will turn right.
5.Press button P and the car will stop moving. Press it again to move the car.
6.If the speed indicating lights start flashing, when you are pushing any of the buttons of the R/C, then you have
to change the batteries with new ones.
7.After changing the wasted batteries with new ones, there will be no need to re-connect the RC with the jeep.
8.Important:
WARNING:
If the batteries do not have enough charge, you will be able to control via the remote control only the
forward and backward motion of the car, Immediately replace the old batteries with new ones.