Moni JUPITER SMT-998, Инструкция по эксплуатации

Страница: 15 / 16

14
PROBLEM CAUSE SOLUTION
The motorbike does
not move
2. When the motorbike is
overloaded or due to improper
use, the fuse will switch off
automatically.
2. If this happens, wait for about a couple of minutes without
using the product. The fuse will switch on automatically.
3.The screws of the wheels
have fallen off.
3. Fix the screws again.
4. The battery cable has fallen
off or is damaged
4. Re-connect or contact an authorised repair service station.
5. Някой от електрическите
компоненти е повреден. Any if
the electric components is
broken.
5. For repairs, contact the store you bought the product from,
the importer or manufacturer.
6. The cables of the electric
circuit are broken or damaged.
6. For repairs, contact the store you bought the product from,
the importer or manufacturer.
The battery cannot
be charged
1. The socket of the battery is
loose.
1. Make sure that the cables of the electric circuit are
connected with the terminal of the battery.
2 . The charger is not connected
correctly.
2. Make sure that the charger is plugged in a the motorbike
socket correctly.
3. The charger is damaged.
3. Contact the shop you bought the product from or the
importer.
The time for use of
the motorbike is
short
1. The time for charging the
batter is shorten.
1. Charge the battery for the recommended time and not
shorter, or charge every time after each use. The charging
must be done at least once a month. Charge for 8 – 12 hours,
but not more than 20 hours.
2. The battery is old.
2. Contact the store you bought the product from, the
importer or the manufacturer. The battery must be changed
with new.
During charging
there is a slight noise
or the charger is
warm
1. This is due to a chemical
reaction.
1. You should not be worried as this is a normal chemical
process.
Low speed
1. The battery is old.
1. Change it with new. Contact the store you bought the
product from, the importer or the manufacturer.
2. The battery is dead 2. Re-charge it.
3. Overload 3. Reduce the load to 30 kg.
4. The surface, on which the
motorbike is being used, is not
even.
4. Use the product only on even surface.
Loud noise from the
gearbox
1. The gearbox is damaged.
1. Contact the store you bought the product from, the
importer or the manufacturer.
There is jitter during
use of the motorbike
1. The motor cable has fallen
off and there is no good
connection.
1. Re-connect.
There are no
melodies and sounds
when the
corresponding
buttons are pushed.
1. The steering wheel cable has
been disconnected.
1. Re-connect.