9
Controlling the VT604
The M-Trak web server is used to control the GPS tracker.
This control can be found under ‘device parameters’.
Select ‘add’ and a vehicle list will appear. A drop down box shows the
various options of control.
Please note, some options do not apply to the model VT604.
The most common options are highlighted in bold.
1.
Driver access
n/a
2. Call restriction
n/a
3. Speed limit warning
set limit for warning
4. Time for power saving mode
Save power after ignition off
Default 30 minutes
5. Sleep parameters
Time to sleep mode with
ignition on if speed is zero
6. Overtime parking
Set time limit for parking with
ignition on before reporting
7. Function switch
a) Turn off GSM or not under
power save mode
b} When speed is zero still
upload GPS data or not
8. Mileage
When to upload data
9.
Interval to upload time data
Set how often to locate
vehicle and upload data to
server. Default is 30 seconds
10.
Link to maintain GPRS
How long to keep GPRS
connection open when
tracker is in sleep mode.
Default 3 minutes.
11. Fuel alarm
n/a
12. Snapshot of parameters
n/a
13. Wake-up after power save
Restart the tracker
14. Cancel alarm warning
Resets alarm parameters
15. Engine lock
Immobilise the vehicle, on or off
16. Device software version
Checks software version
17.
Check fuel level setting
n/a
18. RFID
n/a
19. Temperature threshold
n/a
20. Interval to upload distance
Set how often to locate
vehicle by distance travelled.
Default is 250 metres.
Set parameters 9 or 20 – both can be used but will double the data usage.