Mongoose M80GII Upgrade, Руководство пользователя

Страница: 6 / 24

6
2 STAGE IMPACT SENSOR
This sensor is designed to detect impact to the vehicle such as to the bodywork or glass. It is not
triggered by normal wind or rocking motions.
If the sensor detects a light impact, the siren will sound a few warning chirps (max’ 3
triggers
– see ‘noise pollution’).
If the sensor detects a heavier impact, the analyser circuit will determine this and sound
the siren for 30 seconds and flash the lights. (max’ 3 triggers – see ‘noise pollution’)
The sensitivity is set by the installer and should be at its optimum. Over sensitivity may cause false
alarms. (This type of sensor may not prevent wheel theft, so we advise the fitment of our electronic
tilt sensor and/or locking wheel nuts)
GLASS BREAK SENSOR (M80GII models)
This sensor is designed to detect actual glass breakage by ‘hearing’ the glass break. It should not
be triggered by normal wind, rocking motions or non-metallic knocks.
The sensitivity is set by the installer and should be at its optimum. Over sensitivity should be
avoided to reduce the likelihood of false alarms.
ULTRASONIC SENSOR (optional accessory)
The ultrasonic sensor fill the interior of your vehicle with high frequency sound and is designed to
trigger the alarm when the interior environment changes. Possible changes are the breaking or
removal of glass, a door being opened or even strong wind through a slightly open window.
For the ultrasonic sensor to operate correctly ensure all doors and windows are closed when
arming the alarm system. (False alarms are generally created by open windows or even strong
wind through the air vents)
Due to the efficiency of this type of sensor, we advise that you do not leave people or animals
inside the vehicle as any movement will trigger the alarm.