Mongoose M60B, Руководство по эксплуатации для владельца

Страница: 6 / 24

BUILT-IN TURBO TIMER OPERATION
The built-in turbo timer allows the engine to continue running for a pre-programmed time after the
ignition has been turned off. This feature may be used to allow the vehicles turbo to cool down if
excessively hot. In normal driving situations, the turbo timer should not be necessary.
The timer is programmable for duration from 1 to 5 minutes - see ‘programming’.
To enable the turbo timer feature:- with the ignition on, press button 2 on the remote, siren chirps
once. The timer function will now always be ON each time the vehicle is used.
To disable the timer, repeat the above procedure – siren chirps twice – timer is now off.
NOTE: When the engine is running, arming the alarm does not immediately immobilise the engine
or turn on any sensors. An intrusion by opening any door, bonnet or boot will immediately stop and
immobilise the engine and trigger the alarm.
To arm with timer ON:-
Ensure the vehicle is in neutral gear or ‘park’ position and the handbrake is applied.
Turn the ignition off (engine remains running if timer is ON – engine stops if timer is OFF)
Exit the vehicle ensuring all doors, bonnet & boot are closed.
Arm the alarm by remote as normal.
After the programmed time, the engine stops with the immobilisers engaged and
any sensors arm after a 10 second delay to allow for any residual engine vibration.
CAUTIONS ON USING THE TURBO TIMER
1. When people or animals are still inside the vehicle
2. When doors or windows are to be left open
3. If you require immediate full security protection
4. To save fuel
5. Is prohibited by country or state laws or by any other authority.
6. When doing so is likely to cause a risk or danger to others or property
7. When re-fuelling
6