78D0011
9
WDV Series Gas Fireplace
stOne & Glass placeMent
stOne & Glass placeMent
1. For best results, spread glass evenly over the entire floor and burner making sure the glass
is not too heavy over the burner ports (single layer only). Keep rear vent area open to allow
air to circulate under the stones.
Figure 40
. Place the stones randomly in front of and behind the burner.
cautIOn: Do not allow stones
to sit directly on burner ports or in flame.
Figure 40
3. Turn burner on and adjust glass over the ported area to achieve an even, clean flame.
Page
41, Figure 57
4. Replace glass frame and access door in reverse order of removal.
Glass Only placeMent
1. Spread glass evenly in one layer over the entire floor and burner. It is important to not have
the glass too heavy on ported area (single layer only). Keep rear vent area open to allow air
to circulate for a clean flame and appearance.
. Turn burner on and adjust glass over ported ares to achieve an clean flame.
3. Replace glass frame and access door in reverse order of removal.
FP2434
stone placement
Firebox Perimeter
Burner Surface
Rear Vent
FP434
Figure 40 -
Stone Placement
Example of Stone
Placement
FP2702
rock and stone place
