26D4721
11
K
J
FIREPLACE FRAMING
1. Bend out the nailing fl anges located on each side of the fi rebox.
2. Slide the fi rebox into prepared framing or position fi rebox in its fi nal position and frame later.
3. Level the fi rebox by checking the top edge of the fi rebox. Shim if necessary.
4. Anchor fi rebox to the side framing members using 8d nails or other suitable fasteners.
See Figure 13.
5. The canopy must be installed for safe operation of the heater. See page 13 for canopy installation details.
When fi nishing a custom cabinet, mantel, or other built-in enclosure, the open-
ing size to accommodate the fi replace with trim installed is as follows:
Figure 12 - Custom Cabinet
Figure 13 - Location of Nailing Flanges
Nail Sides
Through Nailing
Flanges
LCUF36 with trim
K
41
7
/
8
// "
J
35
7
/
8
// "
LCUF36 with trim
41
35
The fi replace must be installed giving
full consideration to the clearance
and height requirements identifi ed in
this manual.
W
ARNING
This appliance is approved for the installation of drywall or other combustible
materials against the sides or top of the black-painted fi rebox face.
Noncombustible facings will not burn when exposed to heat coming off this
fi replace. The classifi cation, “Noncombustible material” includes brick and
mortar, stone or marble. These are safe to overlay the black-painted metal face
and do not pose a fi re hazard. Never overlap the fi relace opening.
Содержание LO-RIDER LCUF36
Страница 15: ...26D4721 15 NOTES ...