background image

33D4047

CONTENTS

Important Safety Information ..................................... 3

Product Features ....................................................... 5

Product Features and Specifi cations ......................... 6

Getting Started .......................................................... 7

General Installation Information ................................ 8

Location of Fireplace  .............................................. 16

Clearances and Height Requirements .................... 17

Fireplace Framing ................................................... 18

Connecting the Gas  ................................................ 20

Checking Gas Pressure .......................................... 21

Electrical Wiring (Milli-volt) ...................................... 22

Log Placement ........................................................ 24

Flame Appearance  ................................................. 26

Installing Rock Wool and Checking Burner Flame .. 27

Operating Instructions  ............................................ 29

For Your Safety Read Before Lighting ............... 29
Manual Control Lighting Instructions  ................ 30
Thermostat Control Lighting Instructions .......... 31
Milli-Volt Control Lighting Instructions  .............. 32
Match Lighting Instructions ............................... 33

Cleaning and Servicing ........................................... 34

Blower and Optional Equipment .............................. 34

Illustrated Parts 

Cabinet Accessories .......................................... 35
DFX24C Milli-Volt, DFX24C Manual.................. 36
DFX32C Milli-volt, DFX32C Manual .................. 38
DBX24C T-stat .................................................. 40

Troubleshooting  ...................................................... 42 

Warranty  .................................................. Back Cover 

DFX24C and DFX32C gas log appliances described in this manual feature the 

TRIPLE PLAY BURNER SYSTEM

®  

technology 

with exclusive triple effect technology 

producing a full random yellow fl ame, full depth ember bed and glowing logs. 

Содержание DBX24NTC













































Отзывы: