Monessen • AVFL42RLK Front Face Light Kit Instruction Manual • 20305987 Rev. A • 8/17
6. Insert rope light into clips, starting with nonelectri
-
cal end at bottom right corner and working clockwise
around frame.
NOTE:
The connector end of the rope
light will drape out of frame.
Figures 4 & 5
7. Remove screen frame and access panel from fire
-
place. Remove three (3) screws at top of face, set
aside. Refer to Homeowner’s Manual.
8. Install face by inserting tabs on face into slots on front
of firebox. Secure with four (4) screws (supplied with
face kit) on both bottom tabs and both top tabs.
9. Connect male spade connectors on rope light to fe
-
male spade connectors on wire harness marked
“Blower”.
10. Reinstall three (3) screws in slots at top of surround.
11. Reinstall original screen frame and the replacement
access panel.
12. The rope light is controlled using the blower function
on the remote control.
KT1880
KT1880
rope light complete
Rope Light
Clips
Figure 5
KT1881
install rope lightT
Rope Light
Clips
Connector End
Start Here
Figure 4
Monessen, a brand of Hearth & Home Technologies
7571 215
th
Street West, Lakeville, MN 55044
www.monessenhearth.com
