10. Troubleshooting
ERROR
MESSAGE
PROBLEM & SOLUTION
Your merchant account is not set up to accept the card type that was swiped.
Request another form of payment.
CARD READ
ERROR
There is a problem with the magnetic stripe on the card that was swiped.
Try swiping the card again, this time more slowly or quickly, or from front of the
terminal to the back.
If the message reappears request another form of payment.
Close Batch Failed
The connection with the host has been lost during
. Check the
connections and try another batch close.
ERROR IN
PRINTING
Open the printer, check that there is a paper roll and that the roll is loaded
properly then close the printer.
Invalid Card Length
The card number entered or swiped is greater or less than the predefined limits
for the card type. Check the number and try swiping/keying in again.
Must Swipe Gift
Card
The terminal does not allow for manual entry of gift cards. Swipe the card
instead.
NO MATCH
FOUND
The information you have used to find a transaction in memory can not be found.
Check the information and try again
No Manual Entry
The current transaction does not allow manual entry of the card number. Swipe
the card instead.
NOT A LOYALTY
CARD
The card swiped (or card number entered) during a Redemption transaction is
not a loyalty card.
Check the card and try again.
Printer Error
Open the printer, check that there is a paper roll and that the roll is loaded
properly then close the printer.
Record Not Found
You have attempted to retrieve a reference or account number that is not in the
current batch. Check the number and try re-entering it.
Void Not Allowed
You tried to void a transaction that has already been voided.
10.3
Solving Hardware Problems
If terminal does not display an error message but is not functioning correctly, review this list of hardware
problems to find suggested solutions.
HARDWARE
PROBLEM
SOLUTION
180
Moneris Vx810 Duet Operating Manual