Moneris smartselect, Руководство по эксплуатации

Страница: 82 / 198

Credit Financial Transactions
72 SmartSELECT Merchant Operating Manual v 2.0
9.8: ‘Enter Purchase Amount’ Idle Screen Instructions
If your terminal has a PINSmart PINPad (eN-Touch 1200) attached to it, the ter-
minal displays the
Enter Purchase Amount
Idle screen and the order of the
Swipe
Customer Card
and
Enter Amount
prompts are reversed for ALL financial trans-
actions.
Two examples are provided below of the steps that are changed.
Credit Purchase from the
Enter Purchase Amount
Idle Screen
Substitute the following three steps for Steps 1, 2 and 3 of the Credit Purchase
instructions in
Section 9.1: Credit Purchase .
From the Idle screen:
1. Key in the Purchase Amount and press
Enter
. The
Swipe Customer Card
prompt appears.
2. Swipe the customer’s Credit card on the terminal. The
Enter Last 4 Digits
prompt appears.
3. Key in the last four digits of the customer’s Credit card number and press
Enter
.
Continue with the Credit Purchase instructions in Section 9.1: Credit Purchase
starting with the Host Response screen in step 3.
Credit Purchase Void from the
Enter Purchase Amount
Idle Screen
Substitute the following four steps for Steps 3, 4, 5 and 6 of the Credit Purchase
Void instructions in
Section 9.3: Purchase Void .
After you have swiped the POS Admin Card in step 2, the
Enter Purchase Void
Amount
prompt appears.
3. Key in the amount to be voided and press
Enter
. The
Enter Original Authoriza-
tion Number
prompt appears.
4. Key in the authorization number found on the original receipt and press
Enter
.
The
Swipe Customer Card
prompt appears.
5. Swipe the customer’s Credit card on the terminal. The terminal displays the
prompt
Enter Last 4 Digits
.
6. Key in the last four digits of the customer’s card number and press
Enter
.
Continue with the Credit Purchase Void instructions in Section 9.3: Purchase Void
starting with the Host Response screen display in step 7.